- Home /
- Glass Balustrade and Fencing Supplies /
- Glass Panels /
- Glass Balustrade Panels /
- Glass 10mm Balustrade 680 x 850
Shop Now
- Building and Construction Supplies
- Consumables
- Glass Balustrade and Fencing Supplies
- Hand Tools
- Materials
-
Stainless Steel Fasteners
- Assorted Fastening Trays
- Bolts Products
- Lag Screws
- Masonry
- Metal Threads
- Miscellaneous Fasteners
- Nails
- Nuts
- Rivets
- Security Metal Threads
- Self Drilling Screws
- Self Tapping Screws
- Socket Drive Metal Threads
- Stainless Decking Screws
- Washers
- Stainless Steel Marine and Hardware Supplies
- Wire/Rigging
Glass 10mm Balustrade 680 x 850
This 10mm Toughened Heat Soaked Glass is suitable for use with our Semi Frameless Systems for balustrading. Please note to comply with Australian Standards all Balustrading must have a handrail.
Our glass panels are polished on all edges to give that finished look and include a 2mm radius on all corners to avoid sharp edges.
Specifications:
Width: 680mm
Height: 850mm
Thickness:10mm
Square Metre: 0.58
Weight (kgs): 14kg
About the Glass:
Toughened glass is made from annealed glass via a thermal tempering process. The glass panels are placed on a roller table that takes it through a furnace. It is then heated to above its annealing point of approx 700degreesC. The glass is then rapidly cooled. Punch testing of the toughened glass occurs every house as per Australian Standards.
Heat soaking is another step that takes place after the glass is toughened. The glass is placed on special racks and in a heat soak oven which heats it up to a certain temperature. It will then hold this temperature for several hours before cooling it to room temperature again. The purpose of this test is to induce any breakages in the oven of any panels with NiS inclusion and/or excessive stress and reduces the chance of onsite breakages.
